Brands

25May 2014

Coro-Vane Truck Pumps

The Z-Series Coro-Vane® truck pumps are specifically designed to perform in such severe operating conditions as high differential pressure, pump overspeeding, poor suction conditions and heavy thrust loads associated with a power take-off (PTO) drive system.

Advantages

Innovative cam design virtually eliminates cavitation
New materials utilized in cam and blades extend pump life
Large diameter non-metallic pins are suitable for higher pump speeds
Locked rotor is factory set with shim adjusted thrust bearings which are rated in excess of 4,000 lb

25May 2014

Z-Series Pumps

Z-Series Z3500 Stationary and Truck Pump

Z3500 Overview

Save time and money with higher flow rates—faster loading and unloading!

The new three-inch Z3500 LPG pump is designed for stationary and foot mounted truck applications. The Z3500 stationary pump has the same locked rotor design used in the Corken Z-Series truck pumps to ensure long pump life and excellent performance. With higher flow rates than other three-inch pumps, the Z3500 retrofits Corken’s and other competitive pumps with little or no change in piping.

Z-Series Z3500 Stationary and Truck Pump

Z4500 Overview

Higher capacities shorten fill times for transports and multiple bobtail loading

The Z4500 is a four-inch stationary pump designed for transport loading and multiple bobtail loading applications. If you have two or more bulkheads to load bobtails and transports and would like to shorten your fill times, then the Z4500 is the stationary pump for you. The Z4500 can fill two 3,000 gallon bobtails in 20 minutes or less at typical operating RPMs.

25May 2014

SC-Series Side Channel Pumps

SC-Series Side Channel Pumps are typically used for cylinder filling, vaporizer feeding, pumping from underground storage and bulk filling operations.

Applications
For those LPG applications where high-differential pressure is necessary or low NPSH conditions exist, such as pumping from underground tanks, the SC-Series multistage side-channel is the pump of choice.

Flexibility
The side channel pump is offered in six different sizes, each ranging from one to eight stages. This provides for a wide range of pressures, capacities, and liquid transfer rates.

Design
The Corken SC-Series pump line utilizes an integral centrifugal and side channel design to create flow characteristics which enable the pump to handle up to 50% vapor and low NPSH conditions. The multi-stage modular side channel design which features one to eight open radial-vane impellers is capable of building differential pressures of over 200 psi (14 bar).

25May 2014

Coro-Vane Stationary Pumps

Corken Coro-Vane^® pumps are positive displacement pumps. They produce a maximum differential pressure of 125 psig (8.6 bar g). Corken manufactures four sizes of Coro-Vane pumps, ranging from 1gpm to 350 gpm (0.2–79.5 m³/hr). Corken offers these pumps with v-belt or direct-drive mounting options.

Applications
Typical applications for the Coro-Vane^® pump include cylinder filling, loading and unloading of bulk trucks and transport trailers.

Long Life and Ease of Maintenance
The pump housing and rotors are constructed of ductile iron for extra strength and long life. The sliding vanes are self-adjusting which allows for longer life and higher efficiencies throughout the life of the pump. The pump design includes removable pump casing cams (liners) which when worn can be replaced in minutes. The seal and bearings can be replaced in minutes by simply removing four bolts. Some of the models are equipped with an internal relief valve.

Mounting Options
Corken offers the option of belt drive or gear drive with reducer. The Coro-Vane® stationary pumps are designed to run up to 950 RPM. The C51/F51 bottle filling Coro-Vane pumps are designed to run at 1800 RPM.

25May 2014

Coro-Flo Pumps

The Coro-Flo® pump is offered in three different model drive configurations. The C-Model configuration has the pump close coupled to a motor (shown below). The F-Model has a separate pump body and is directly driven through a coupling. And finally, the DS/DL Model pumps are mounted on a special bracket which will accept standard C-face motors.

Designed specifically for LPG, the
C-Modelpump is extremely quiet and free of vibration and pulsation and provides trouble free service and long life for volatile liquids such as LPG. The one moving part, the impeller, floats on the shaft without contacting adjacent surfaces, thus extending pump life. All Coro-Flo® pumps are listed by Underwriters’ Laboratories, Inc. for LP-Gas and anhydrous ammonia service.

The F-Modelpump is the base plate mounted version. Coro-Flo® pumps are design to operate at shaft speeds between 2880—3600 rpm. The F-Model provides the flexibility of motor selection.

The DS/DL Model pumps are designed to eliminate the need for a baseplate, coupling guard, and coupling alignment which makes the DS/DL series pumps compact and easy to install. The special bracket supports both the pump and the motor so they can be directly coupled.

The Coro-Flo® pumps have an option of ANSI flange connectionson all of the various sizes and model types.

25May 2014

Industrial Horizontal Compressors

Applications

The horizontal compressors offer the largest capacity of any of Corken’s compressor lines. This line of compressors can be used for unloading tankers or multiple railcars, wellhead gas recovery, pressure boosting, and gas blanketing.

Options

The modular design of the horizontal compressor allows for various combinations of cylinder sizes with up to 4 stages of compression. Corken currently offers 8″ (203.2 mm), 6″ (152.4 mm), 5″ (127 mm), 4″ (101.6 mm), 3¼” (82.6 mm), and 2¾” (69.9 mm) cylinders. Most of these cylinders are available in a water-cooled version. Various other options such as variable clearance heads, corrosion resistant coating, and external crankcase oil cooler are also available.

Features

Modular construction
Low vibration design
Heavy duty cylinder design
Self-lubricating piston and rider rings
Simple to Service
Smooth quiet operation
Rings & Packing can be replaced without moving the cylinder

Engineered Packages

Custom-engineered skid-mounted units can be supplied with control panels, wiring, ASME code liquid traps and other special accessories as required.

Selection
Due to the versatility of the various cylinder combinations, the horizontal compressors provide a full range of capacities up to 414 cfm (703.5 m3/hr) with maximum working pressures of up to 4,500 psig (310.3 bar).

25May 2014

Industrial New Chlorine Compressors

Applications
These compressors were specifically designed for applications involving the transfer and recovery of Chlorine. Railcar unloading is the most typical application although these compressors are also used in the recovery residual vapors, and pressure boosting. Corken’s T-style design is incorporated in order to provide precise leakage control.

Options
Corken supplies custom engineered packages as well. Skid mounted units can be supplied with control panels, safety controls, receiver tanks, liquid traps, and other special accessories as required.

Features

ANSI flanges
Oil-free design
Special cleaning and corrosion resistant coating on all wetted parts
Special purge kit
All nylon, aluminum, or 300 series stainless steel are replaced with compatible materials
Packing and valve springs are constructed of Inconel 750
High-efficiency valves
Two compartment distance piece
Tapped openings in crankcase for purging or venting
Special Nitrogen test/purge/pad process

Double Distance Piece (T-Style)
Designed for improved leakage control, this option has three separate sets of packing per piston rod which effectively form two distinct distance pieces or barriers to external leakage. Each distance piece has its own line connections and can be separately pressurized, purged or vented to provide a wide range of application flexibility. For added convenience, purge kit options are available that include all the accessories needed to control the purging or pressurization of each chamber.

Selection
Corken’s Chlorine compressors provide a range of piston displacements from 8 to 35.5 cfm (13.6–60.3 m³/hr).

25May 2014

Industrial T-Style Compressors

T491 Compressor

Applications

T-style compressors can handle the same applications as a D-Style compressor. These include transfer of liquids between tanks, off-load/load out liquids, recover residual vapor, pressure boosting, etc. The T-style, however, offers the advantage of precise leakage control. The T-style compressor was designed to provide maximum leakage control when handling toxic, hazardous, and explosive gases.

Options

Corken offers a broad range of material options. Corken also offers various corrosion resistant coatings, valve options, and equipment configurations. Corken supplies custom engineered packages as well. Skid mounted units can be supplied with control panels, safety controls, receiver tanks, liquid traps, and other special accessories as required.

Features

Two compartment distance piece
Threaded and ANSI flanges
Oil-free design
Self-lubricating teflon piston rings
Ductile iron construction
Positive piston rod/packing alignment
O-ring gaskets
High-efficiency valves
Purge or pad capability

Double distance piece (T-Style)
Designed for improved leakage control, this option has three separate sets of packing per piston rod which effectively form two distinct distance pieces or barriers to external leakage. Each distance piece has its own line connections and can be separately pressurized, purged or vented to provide a wide range of application flexibility. For added convenience, purge kit options are available that include all the accessories needed to control the purging or pressurization of each chamber.

Serviceability

Corken compressors are designed to minimize required maintenance and make such maintenance extremely simple. Valve replacement may be accomplished without disturbing the piping and ring replacement may be accomplished by simply removing the head.

Selection

Corken offers a broad range of models and corresponding piston displacements. The oil-free units range from 7 to 60 cfm (11.9-102 m³/hr). Depending on the compression ratio, Corken provides either single- or two-stage compressors for efficient gas compression.

25May 2014

Industrial D-Style Compressors

Applications

Compressors are extremely versatile. They can be used to transfer liquids between tanks, off-load/load out liquids, recover residual vapor, pressure boosting, gas blanketing, gas gathering, evacuate vapors for maintenance purposes, etc.

Options

Features

Threaded and ANSI flanges
Oil-free design
Self-lubricating Teflon piston rings
Ductile Iron Construction
Positive piston rod/packing alignment
O-ring gaskets
High-efficiency valves

Serviceability

Selection

Corken offers a broad range of models and corresponding piston displacements. The oil-free units range from 4 to 60 cfm (6.8-102 m3/hr) and the double acting versions are capable of between 50-100 cfm (100-171m3/hr). Depending on the compression ratio, Corken provides either single- or two-stage compressors for efficient gas compression.

25May 2014

Industrial SC-Series Side Channel Pumps

Corken SC-Series pumps are a rotary side channel design. They produce a maximum differential head of 1,150 ft (350 m). The side channel pump is offered in six different sizes, each ranging from one to eight stages. This provides for a wide range of pressures and capacities ranging from 1gpm to 185 gpm (3.8–700 L/min). These pumps can handle discharge pressures up to 580 psig (40 bar).

Product Features

Radial vane impellers and two outlet openings per stage allow for high vapor content
Enclosed centrifugal impeller at pump suction provides improved NPSH capabilities
Exceptional in light liquid and liquefied gas transfer
Floating Impeller – No metal to metal contact.
Modular design
Smooth continuous flow

Product Options

Magnetic Drive (shown)
Stainless steel construction
Double seal option
High Temperature options
Bronze or steel impellers
DIN spec or ANSI drilled flanges

Versatility

Corken’s SC Series pumps have provided solutions for a good number of problematic applications over the past 6 years. The capability of this pump to handle NPSH (Net Positive Suction Head) as low as 1 ft coupled with its ability to pump liquids with high vapor content have made it particularly attractive to many of our customers.

NEBİMAK Ltd.Şti – Headquarter